Intuitively Operated Surface Texture Measuring Instruments

SURFCOM TOUCH Series

Portable surface roughness solution for any measurement challenge. Available with three tracing drivers for measurement on vertical surfaces.

Surface roughness solution for any measurement challenge

Our intuitively operated surface texture measuring instruments allow easy roughness measurements of various types of workpieces.

Overview
Options
Technical Data
Contact us

SURFCOM TOUCH Series

Features

All SURFCOM TOUCH systems come with an intuitive and easy-to-use screen for condition setting,
calibration, measurement and analysis. An amplifier with a 7-inch wide touch panel and a new interface provides higher operability. Easy-to-use operation eliminates the need of instructions.

Advantages

  • Settings can be performed such as language, icon layout, management of internal/USB memories.
  • Multi-language support available worldwide
  • Easy-to-follow user’s guide/quick reference guide
  • USB/micro USB ports as standard equipment
  • Measurement results can be printed quickly
All SURFCOM TOUCH systems come with an intuitive and easy-to-use screen for condition setting, calibration, measurement and analysis.

SURFCOM TOUCH 35/40/45

Portable surface roughness solution for any measurement challenge

The system is available with three small and light skidded tracing drivers for measurement with different attitudes. In addition to horizontal surfaces, measurement on vertical surfaces can be performed in narrow areas with a transverse trace.

The SURFCOM NEX 001 surface measuring station enables highly effective roughness and waviness measurements.

SURFCOM TOUCH 35

Standard type
The standard-type with different attitudes to measure horizontal, inclined, vertical and ceiling surfaces.
The SURFCOM NEX 030 is a flexible CNC contour measuring station and provides outstanding straightness accuracy in the X axis.

SURFCOM TOUCH 40

Retraction type
Retract-type that reduces damage to the stylus and pickup by raising the pickup while waiting for measurement or at the end.
SURFCOM NEX 040 CNC measuring station with increased accuracy and automated probing force configuration

SURFCOM TOUCH 45

Horizontal tracing type
The transverse trace-type where the pickup moves sideways.
The SURFCOM NEX 001 surface measuring station enables highly effective roughness and waviness measurements.

Advantages of the portable surface roughness solutions

  • Palm-sized tracing drivers selectable for workpieces and measurement areas
  • A calibration table offered as an accessory makes calibration work easy
  • Optional pickups allow for various types of measurement

SURFCOM TOUCH 50

Surface roughness and straightness in one compact machine

Extended Z-axis measurement range

The high performance pickup with an extended measurement range from 800 to 1,000 μm and a Z-axis minimum resolution of 0.0001 μm allows for wide-range and high resolution skidless measurement. In addition to a flat surface, the roughness or waviness on an undulating surface such as a stepped or round surface can be evaluated with one trace.

Full flexibility

Skidless measurement with a high performance pickup while having high resolution and with a wide measuring range. Various types of workpieces can be measured by changing the stylus for deep, long, or small holes or a round surface.

High-performance tracing driver

Retract-type that reduces damage to the stylus and pickup by raising the pickup while waiting for measurement or at the end.

Advantages of SURFCOM TOUCH 50

  • Suited for measuring cylindrical workpieces, a tracing driver can be placed on work piecies by using an optional roll footing.
  • SURFCOM TOUCH 50 can be connected with a handytype tracing driver.
With SURFCOM TOUCH 50 skidless measurements with a high-performance pickup and high resulution can be performed.

SURFCOM TOUCH 550

High-end solution with an electric column offering high accuracy and size variation

Extended measuring range

The high performing pickup with an extended measurement range from 800 to 1,000 μm and a Z-axis minimum resolution of 0.0001 μm allows for wide-range and high resolution skidless measurement. No need to consider measurement range. In addition to flat surface, the roughness or waviness on undulating surface such as stepped or round surface can be evaluated with one trace. Leveling and zeroing before measurement can also be performed easily.
The high performing pickup with an extended measurement range from 800 to 1,000 μm and a Z-axis minimum resolution of 0.0001 μm allows for wide-range and high resolution skidless measurement.

Flexibility in terms of machine size

SURFCOM TOUCH 550 allows users to select a combination of the size of the granite base, the height and type of the column and the drive range in the X-axis direction.

Optional Equipment

An optional compact measurement stand for measuring high workpieces or measuring with jigs.

Technical Data for SURFCOM TOUCH Series

SURFCOM TOUCH 35/40/45

 

SURFCOM TOUCH 35

SURFCOM TOUCH 40

SURFCOM TOUCH 45

Z direction

-210 to +160 μm

-210 to +160 μm

-210 to +160 μm

Drive axis

X direction 16 mm

X direction 16 mm

Y direction 4 mm

Movement type

Standard type

Retraction type

Horizontal tracing type

Evaluation length

0.2 to 16 mm

0.2 to 16 mm

0.2 to 4.0 mm

Measurement speed

0.5, 0.6, 0.75, 1.0 mm/s

0.5, 0.6, 0.75, 1.0 mm/s

0.6 mm/s

1 μm + μm/mm measuring height

SURFCOM TOUCH 50

 

SURFCOM TOUCH 50

Z direction

±500 μm

X direction

50 mm

Evaluation length

0.1 to 50 mm

Straightness accuracy

0.3 μm/50 mm

Detector vertical movement volume

50 mm

Measurement speed

0.15, 0.3, 0.6, 1.5, 3 / 0.05, 0.1, 0.2, 0.5, 1 mm/s (switching)

SURFCOM TOUCH 550

 

SURFCOM TOUCH 550

Z direction

±500 μm

X direction

100 mm to 200 mm

Drive distance

100 mm to 200 mm

Straightness accuracy

(0.05 + 1.5L/1000) μm

Measurement speed

0.03, 0.06, 0.15, 0.3, 0.6, 1.5, 3, 6 / 0.05, 0.1, 0.2, 0.5, 1, 2, 5 mm/s (switching)

L: measurement length (mm)